How to Replace Air Control?
Typically, IF ONLY the button or the mechanical part of the air control button has failed, you do NOT need to replace the complete assembly. This is good because to replace the complete assembly you need to replace most/all the plumbing for that air control.

Normally, you can place your hand flat on the face of the air control button and twist counterclockwise about 1/4 turn and it will release the button to remove the bezel and button. That will expose the "guts" of the air control. Take a pair of pliers and grab the top of the mechanical inside the housing and pull up. It will release and come out. Swap parts with new as needed.
     
     
 
 
Copyright © 2011 Clear Creek Spa Service and LPS Bath and Spa - B Bouman and Company LLC
Jacuzzi® is a registered trademark of Jacuzzi Inc. -  Jacuzzi Premium  and Jacuzzi Hot Tub are registered trademarks.
All Rights Reserved